• Have any questions?
  • +91-944 334 5035
  • info(at)scholarshipsinindia(dot)com

NIT Calicut M.Tech & M.Plan (Sponsored) Admissions 2020

NIT Calicut M.Tech & M.Plan (Sponsored) Admissions 2020

ABOUT THE INSTITUTE

National Institute of Technology Calicut (NITC) is one of the premier national institutions for technical education in India. This was formerly known as Calicut Regional Engineering College. NITC is a technical institution of national importance set up by an Act of Parliament (Act 29 of 2007). The Institute offers academic programmes leading to B.Tech., B. Arch., M.Tech., M.C.A., M.Sc, M.B.A., M.Plan. and Ph.D. degrees in the appropriate disciplines. NITC is
engaged in a wide spectrum of activities covering research and development, industrial consultancy, continuing education and faculty & staff development

VISION

International standing of the highest calibre

MISSION

To develop high quality technical education and personnel with a sound footing on basic engineering principles, technical and managerial skills, innovative research capabilities and exemplary professional conduct to lead and to use technology for the progress of mankind, adapting themselves to the changing technological environment with the highest ethical values as the inner strength.

LOCATION

Set in a picturesque landscape at the foothills of the Western Ghats, NITC is located about 22.5 km north-east of Calicut City in the state of Kerala, India. It stretches over a length of about 1.5 km along the Calicut-Mukkam road, extending over an area of approximately 120 hectares. The nearest airport is Calicut which is about 45 km away from the campus.

INFRASTRUCTURE FACILITIES

The Institute has well equipped library, computer centre, seminar halls, lecture hall complexes, various laboratories in different departments, workshops, hostels for accommodating students, health care centre and adequate facilities for sports, games and cocurricular activities. The main computer centre, which is open 24 hours a day, has all the relevant software packages and latest computers with internet facilities. To provide service to the campus residents, State Bank of India, Post Office, Canteen & Co-operative Store are also functioning in the campus.

CO-CURRICULAR ACTIVITIES

Students’ chapter of many professional bodies such as Computer Society of India (CSI), Indian Society for Technical Education (ISTE), Institute of Electrical & Electronics Engineers (IEEE) and Institution of Engineers (India) are functioning at NIT Calicut. In previous years, NITC won the best chapter award for CSI as well as ISTE. The Centre for Value Education provides  students, a unique opportunity to engage in activities that promote human values. Social work is a part of curriculum. Students get opportunities to take part in cultural and other activities through a number of Clubs such as Literary & Debating Club, Industrial & Planning Forum, Nature Club, etc. operating under the Students Council. Students annually organize cultural festival Ragam and technical festival Tathva in which students from all over India participate.

STUDENT SUPPORT SERVICES

The Institute has Training and Placement department that looks after the training needs of the students, their placement of jobs on graduation and partnership in industry. An Entrepreneurship Development Cell promotes the students for self-employment. A Technology Business Incubator (TBI) with the assistance from Department of Science and Technology, Government of India is established. TBI helps in incubating knowledge based start-ups into sustainable business with single window system.

DISTINGUISHED ALUMNI

Former students have made immense impact in various professional areas such as academics, administrative services, research activities in R&D laboratories, government and private industries. A strong network of alumni thrives in India as well as in foreign countries and is known as RECCAA.

WITHDRAWAL/ DISCONTINUATION OF PROGRAMME

Withdrawal/ Discontinuation of admission from any programme during the process of Counseling will be as per the guidelines issued by the Counseling agencies from time to time. On joining the courses the student will be governed by the Institute rules for withdrawal/discontinuation. As per the rule in force, the fees paid by the students for their current and previous semesters of the programme will not be refunded and the caution deposit will be adjusted against the processing fee, after clearing the liabilities if any

M.Tech./M.Plan. PROGRAMMES OFFERED

  • M.Tech./ M.Plan. Programme Programme  : –  Architecture and Planning AP Architecture and Planning  AR61
  • Civil Engineering CE :-  Structural Engineering CE61 ,Traffic & Transportation Planning CE62,Offshore Structures CE63,Environmental Geotechnology CE64,Water Resources Engineering CE65
  • Chemical Engineering  : – CH Chemical Engineering CH61
  • Computer Science & Engineering CS : – Computer Science & Engineering CS61,Computer Science & Engineering,(Information Security) CS62
  • Electrical Engineering EE : – Instrumentation & Control Systems EE61 ,Power Systems EE62,Power Electronics EE63,Industrial Power and Automation EE64,High Voltage Engineering EE65
  • Electronics & Communication Engineering :-  Electronics Design & Technology EC61,Microelectronics & VLSI Design EC62,Telecommunication EC63,Signal Processing EC64
  • Mechanical Engineering :-  Industrial Engineering & Management ME61 , Thermal Sciences ME62, Manufacturing Technology ME63,Energy Engineering & Management ME64,Materials Science & Technology ME65,Machine Design ME66
  • School of Materials Science and Engineering  ;-  Nanotechnology MT61

ELIGIBILITY FOR ADMISSION TO M.Tech. PROGRAMMES – SPONSORED SEATS

The maximum age for admission to M.Tech./M.Plan. programme is 50 years.  Candidates for admission to M. Tech./M.Plan degree programme at NIT Calicut should have passed B.E./B.Tech/ B.Arch. / B.Plan. in an appropriate branch from an approved Institute/University with minimum 60% marks (or CGPA 6.5/10) in aggregate of all semesters/years and for SC/ST/PWD candidates 55% marks (or CGPA 6.0/10) in aggregate of all semesters/years. Holders of AMIE (approved by AICTE) / other nationally approved programmes equivalent to B.Tech / B.E., in an appropriate area of study, may also be considered eligible. Candidates under lateral entry should have passed the three-year
diploma in engineering with minimum 60% (or CGPA 6.5/10) marks and for SC/ST/PWD minimum 55% marks (or CGPA 6.0/10). A maximum of 5 seats in each M.Tech. programme and a maximum of 3 seats in the M Plan program are available for candidates under the sponsored category. Sponsored candidates should have a minimum experience of two years at the time of applying for the programme and must be sponsored by their employers. Candidates from Central/State Govt. Institutions, Public Sector Organizations and reputed Private Organizations will be considered in this category. In the case of teachers sponsored by Engineering Colleges and Polytechnics, the Institution should be recognized by AICTE/CoA. The employer while sponsoring will have to give an undertaking that the candidate will be paid full salary during the entire period of the M.Tech./M.Plan. Programme and that the candidate will not be  withdrawn midway. The sponsored candidates are NOT eligible for campus interview conducted by Placement Cell.

ELIGIBILITY FOR ADMISSION TO M PLAN. PROGRAMME – SELF SPONSORED SEATS

A maximum of 2 seats are available for admission in the M Plan Program for candidates under Self Sponsored Category. These seats are available to only those candidates with Masters’ Degree (M.A./M.Sc) in  Geography/Sociology/Economics. These candidates shall be required to have passed the two-year regular full-time M.A./M.Sc. Degree in Geography/Sociology/Economics with a minimum 60% marks (CGPA 6.5/10) in aggregate
of all semesters/years in the qualifying examination and for SC/ST/PWD candidates minimum 55% marks (CGPA 6/10) in aggregate of all semesters/years. The candidates should have a valid UGC NET Score with/without JRF

SELECTION OF CANDIDATES

The admission to M.Tech. Programmes as well as M.Plan. Programmes under Sponsored/Self-Financed category under Sponsored category will be based on written test and/or Interview by the respective Department/School.

 

Test and/or Interview

Eligibility for test and/or interview and call letter for test and/or interview can be downloaded from the website after login using application number and date of birth. No separate call letter will be dispatched. All those who are called for test and/or interviewwill have to produce all the original certificates and other documents for verification. The verification of the documents, test and/or interview will be held in the Office of the respective department/school. The reporting time will be 09.00 a.m.

Admission

Admission is subject to satisfying the eligibility requirements and the performance of the candidate in the test and/or interview. The call for Test and/or Interview does not guarantee admission. Candidates offered admission would have to remit the fees on the day of admission.

HIGHLIGHTS OF M.Tech./M.Plan. PROGRAMMES

The four-semester (two-year) M.Tech/M Plan Programmes are based on the credit system. The programmes comprise several core and elective courses and project work. The highlights of M.Tech./M.Plan. Programmes offered by various departments are given in the following section.

DEPARTMENT OF ARCHITECTURE AND PLANNING

M.Plan. in Urban Planning (AR61)

The Post Graduate Degree (2 Year M. Plan.) Program in Urban Planning aims to produce generalist planning professionals of international quality who can adapt to any challenging planning situation with superior capability to use geo-informatics which includes GIS, remote sensing, related models and quantitative methods in urban, regional and environmental planning. The program envisages inculcating scientific diagnostic and urban management abilities in professional planners to understand planning issues holistically and equip them with predictive ability to analyze the outcome of economic, social, environment and energy impacts using simulation of future scenarios.

DEPARTMENT OF CHEMICAL ENGINEERING

M. Tech. Programme in Chemical Engineering (CH61)

The M.Tech. Programme in Chemical Engineering is designed to provide a strong base on Chemical reactor theory, Transport phenomena, Thermodynamics, Mathematical methods in chemical engineering, Process simulation, Optimization and control, Separation processes, Polymer engineering, as well as in frontier areas of Energy and environment, Nanoscience, Molecular simulations, and Biotechnology. The research component of the programme is
meant to develop capabilities to confidently undertake an independent analysis of problems of industrial relevance as well as of fundamental significance. The M.Tech. programme equips students with skills which enable them to contribute to the development of Chemical Industry in India.

DEPARTMENT OF CIVIL ENGINEERING

M.Tech. Programme in Structural Engineering (CE61)

The M.Tech. Programme in Structural Engineering was started in the year 1971 with an intention of providing a comprehensive education and training to civil engineers using a holistic approach to structural systems engineering by emphasising and building on the commonality of engineering structures at the levels of materials, mechanics, analysis and design. The programme provides a thorough training in the design principles and structural action as related to components and systems over a broad range of application areas. It also provides a thorough training in the methods of analysis, including problem formulation and the use of current mathematical and computational tools. The programme covers specialised topics in Theory of Elasticity, Earthquake Resistance Structures, Structural Dynamics, Structural Optimisation, Finite Element Analysis, Advanced Metal Structures, etc.

M.Tech. Programme in Traffic & Transportation Planning (CE62)

The M. Tech. Programme in Traffic & Transportation Planning was started in the year 1985. The programme aims to impart futuristic and need-based technical education, and to promote reengineering in the field of Transportation Engineering for working out cost-effective solutions in liaison with local authorities and to establish social relevance of research and developmental activities. Under the PMGSY (Pradhan Mantri Gram  SadakYojana), and National Highway Development Programme (NHDP-Golden Quadrilateral, North-South and East-West corridors), etc. the importance given to the highway development has increased in leaps and bounds. Similarly, considerable attention is being given to the development of railways, waterways and airways. The present programme in Traffic &Transportation Planning has three broad areas of specialization namely i) Traffic Engineering ii)
Transportation Planning and iii) Pavement Technology.

M.Tech. Programme in Offshore Structures (CE63)

The goal of the Programme is to prepare graduate students in civil engineering for the offshore profession having application to the challenging conditions encountered in the ocean environment. The oil industry with its crucial role in deciding the economy of the nation is shifting its exploitation strategy from land-based to ocean- based systems the world over. This shift in emphasis has resulted in turn in a growing need for structural engineers with expertise in design of offshore platforms and other deepwater structures, marine pipelines, towed bodies and cable systems, etc.The various major courses offered in the programme are Dynamics, Design of Offshore Structures, Marine Foundations, Offshore Structural SystemsModelling and Behaviour, Theory of Elasticity, Structural Wave Hydrodynamics, Statistics, Probability & Reliability Methods in Civil Engineering.

M.Tech. Programme in Environmental Geotechnology (CE64)

The M.Tech. Programme in Environmental Geotechnology is an inter-disciplinary course covering geotechnical engineering and environmental engineering. The Programme will train engineers to develop environmentally sound solutions to geotechnical problems and to solve environmental engineering problems unique to soil and subsurface conditions. The Programme has its major core courses in topics dealing with geotechnical engineering, environmental protection and pollution control. A good number of electives are offered in areas such as foundation engineering in difficult soils, waste management, waste water engineering, earth quake engineering, landslide mitigation methods, etc. The project work is spread over the third and fourth semesters.

M.Tech. Programme in Water Resources Engineering (CE65)

The M.Tech. Programme in Water Resources Engineering was started by the Department of Civil Engineering in the year 2015. A scientific and systematic approach is required to efficiently manage any water resources system which is characterized by either scarcity or excess issues, and quality issues. The success of any water resources project depends on the sound understanding of the interactions of various components of the system, effectiveness  in collection and interpretation of relevant data, and use of modern computational techniques in the solution of the problem. This PG Programme intends to prepare graduates in Civil Engineering to attain these abilities by introducing them to topics like Advanced Fluid Mechanics, Surface and Subsurface Hydrology, Water Resources Systems Analysis and Design, Remote Sensing and its Applications in Water Resources Engineering and Computational Hydraulics and Hydrology. In addition to these core courses, six more elective courses from the related fields of Water Resources Engineering can be credited by the students depending on their aptitude and interest. A project work in the second year of the Programme provides the student with an opportunity to apply the principles and methods got familiarized in the first year to analyze and design some aspects of realistic water resources case studies.

DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING M.Tech.

Programme in Computer Science & Engineering (CS61)

The two-year post graduate Programme in Computer Science is intended to train the students in advanced areas in computer science and specialized topics in emerging areas in computing. Courses offered include Topics in  Algorithms, Topics in Programming Languages, Operating Systems Design, Trends in Middleware Technologies, Bioinformatics and Machine Learning. The project work in the second year is intended to orient the student towards deeper study and research in her/his area of interest.

M.Tech. Programme in Computer Science & Engineering [Information Security] (CS62)

Information security relates to the protection of IT assets against the risks of loss, misuse, disclosure or damage. Information security management comprises of the controls that sensibly manage these risks. By proactively managing information security, we can reduce the likelihood and/or the impact on our information systems from a wide range of threats. The M.Tech. Programme in Computer Science & Engineering (Information Security) is
envisaged to train graduates in Computer Science & Engg. / IT/ MCA with the necessary skills to design and develop policies, protocols and techniques to secure information systems.

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

M.Tech. Programme in Electronic Design and Technology (EC61)

This course aims to educate / train engineers as creative designers of electronic products and systems. This programme is designed with the belief that any engineer concerned with the development of new electronic product needs to integrate the functional design, industrial design, equipment packaging and manufacturing. The Indian industries are concentrating more on value-added electronics and IT products, and these industries need electronics design engineers, who can identify the customer requirements and develop appropriate systems. There are very few institutes in India, providing specialized training programme on Electronics Design Technology with emphasis on practical design andproblem-solving skills.

M.Tech. Programme in Microelectronics and VLSI Design (EC62)

Micro Electronics is the driving force behind a large number of technical and commercial innovations in the present world scenario. There is a need for good amount of educated/trained manpower in Micro-Electronics and VLSI Design related areas in the coming years to raise India’s share in the global VLSI Market. This is one of the thrust areas of the ministry of Information Technology, Govt. of India. This is possible only through specialized programmes in Micro-Electronics and VLSI Design. The course is well suited for the current academic and industrial needs of India. Employment opportunities are ample in this field as the industries recruit engineers on a global scale.

M.Tech. Programme in Telecommunication (EC63)

The social and economic life of the society is getting increasingly dependent on the Information and Communication Technologies. The technological revolution in the area of telecommunications has irreversibly changed the economy of every nation and the dynamics of every society. Many recent analyses done on the Telecommunication sector in India predicts huge growth of the sector in coming decades. The two year M. Tech. programme in telecommunication is aimed at producing high-quality man power in the area. The curriculum of the programme is designed so as to make the students knowledgeable in the fundamental concepts involved, trained in the basic skill sets required, familiar with the latest technological advances made and sensitive to the social and ethical issues entailed in this extremely challenging field.

M.Tech. Programme in Signal Processing (EC64)

Signal processing deals with the analysis, study, interpretation and manipulation of signals.The signals may be speech, audio, image, video, ECG, EEG, signals captured by communication receivers, seismic signals etc. Hence, signal processing techniques are finding important applications in wide areas of technology ranging from wired and wireless communication to multimedia processing to medical diagnosis to earth quake prediction. The two year M. Tech.
program in Signal Processing is designed to give the students a strong theoretical background of the subject and introduce them to some of its practical applications.

DEPARTMENT OF ELECTRICAL ENGINEERING

M.Tech. Programme in Instrumentation & Control Systems (EE61)

Instrumentation is the heart of any industry and sophisticated process control and guidance techniques are essential in modern days. This course, which was the first master’s Programme to be started in this institute, has been very useful in processing sufficient knowledge in control system and instrumentation to cater to the needs of industry and research organisations. The syllabus of this programme is structured to have the latest trends in Control and Instrumentation.

M.Tech. Programme in Power Systems (EE62)

This course is structured to give a strong base on power system generation, transmission & distribution, operation, analysis, dynamics and control together with the recent advances such as FACTS, power quality and deregulation and smart grid technologies. Adequate exposure is also given on software tools and techniques in the relevant areas. The course is designed so as to enable the students to work effectively both in industries and utilities.

M.Tech. Programme in Power Electronics (EE63)

This programme was introduced to meet the needs of the modern power industry which makes use of power converters and inverters. The emphasis is given for both theory and practical through design, fabrication and testing. The courses incorporate modern trends in switched mode power supplies, active power filters and the latest control techniques in drives.

M.Tech. Programme in Industrial Power & Automation (EE64)

Micro-processors/Micro-controller/DSP controlled motor drives, process control & SCADA systems, plant automation, cogeneration, power wheeling, power factor controllers etc. in industries make the necessity of integrating these devices and systems with electric power control. With the introduction of time of use and dynamic tariff schemes by the utilities, industries can effectively adapt load control techniques and energy conservation programmes. Computer controlled systems with integrated load control become essential for the modern industries. The M.Tech. programme in ‘Industrial Power & Automation’ is with this objective to provide sufficient theoretical and field experience on the above systems to the Electrical engineers.

M.Tech. Programme in High Voltage Engineering (EE65)

With the progress of technology, the transmission voltages have increased to ultra- high voltage levels. At these levels the insulators, the circuit breakers and all other equipments that are in operation will have to deal with strong electromagnetic fields that can affect the power quality as well as the proper functioning of the equipment. Thus it is essential that the electrical engineers need be equipped with the latest research and development issues in high
voltage transmission and distribution technology and its analysis from the electromagnetic point of view. The curriculum is designed to include both theoretical and practical aspects of high voltage technology. Exposure is also given on experimental techniques for testing of insulators as well as on software tools and techniques in the relevant area. Emphasis is also given on the latest developments in the field of nanodielectrics.

DEPARTMENT OF MECHANICAL ENGINEERING

M.Tech. Programme in Industrial Engineering & Management (ME61) NIT Calicut has started PG Programme in Industrial Engineering in the year 1984. Later this Programme is restructured in the year 2003 to include management topics also and it was renamed as Industrial Engineering & Management. The primary objective of this Programme is to orient graduate Engineers in the broad areas of Industrial Engineering and functional aspects of management. The Programme includes courses covering Decision modelling, Inventory and supply chain management, Cost management, Production planning &control, Finance management and Marketing management. A choice of several advanced electives in areas such as Lean manufacturing, Management information systems, Human resource management, Strategic management, Work system design, System modelling and simulation, Risk management, Quality engineering, etc. are offered under the Programme. The theory is enhanced through laboratory classes and seminars. Adequate exposure is also given on software tools and techniques in the relevant areas. This Programme is tailored to develop suitable skill for students to manage the resources optimally and to develop better procedures and management practices for efficient operation of the corporate.

M.Tech. Programme in Thermal Sciences (ME62)

The M.Tech.. in Thermal Sciences is designed to equip engineers with latest know-how of the current trends related in the fields of research and industry. The course content includes adequate amount of theoretical aspects of thermodynamics, fliud flow and heat transfer applied to classical and practical engineering problems. The major courses offered in this specialization are Advanced chemical thermodynamics, Advanced fluid mechanics, Analytical
methods in heat transfer, Analysis of thermal power plant cycles and systems, Cryogenic engineering, Thermal environmental engineering, Internal combustion engine systems, Combustion and performance analysis, Multiphase flow, Design of heat transfer equipments Advanced computational methods in fluid flow and heat transfer, etc. The students also get opportunity to undertake research work pertaining to current engineering problems in the dissertation wherein they are exposed to latest equipments and software packages.

M.Tech. Programme in Manufacturing Technology (ME63)

The objective of this Programme is to train manpower required to develop and manage the manufacturing capabilities of industries. The core courses offered in this specialization are Machining science, Metal forming, Machine tool design & analysis, Metal casting &joining, Robotics Advanced Metrology &Computer Aided Inspection and Quality engineering & management. A good number of electives are offered in areas such as Tribology, Mechatronics, Cellular manufacturing systems, Tool engineering & design, Finite element methods & applications, Non-traditional machining processes, Computer integrated manufacturing systems, etc.

M.Tech. Programme in Energy Engineering & Management (ME64)

Energy Management is critical to our future economic prosperity and environmental wellbeing. This M.Tech. Programme is designed to develop Mechanical/Chemical engineers with a high standard of expertise in energy management. The core courses offered in this Programme include Energy conversion systems, Renewable energy technology, Electrical energy systems and management, Design and analysis of energy systems, Energy & environment, and Energy conservation in thermal systems. A number of courses such as Energy policies for sustainable development, Optimal design of heat exchangers, Direct energy conversion, Cost management, Heat pump technology, Fluidized bed systems, Industrial load management etc., are offered as electives. There is ample scope for doing project work in non-conventional energy systems.

M.Tech. Programme in Materials Science & Technology (ME65)

The educational mission of the Materials Science & Technology Programme is to provide students with a unique interdisciplinary academic foundation on which development of intellectual capacity, and the scholarly training needed to address complex problems in materials science with emphasis on advances in materials processing, Electronic materials, Ceramics, Composites, Polymers, Super alloys, and the selection of materials to meet specific design goals. An in-depth study on materials science and technologies will contribute to the development of newer materials and material systems. The programme provides students the following essential elements: a firm grasp of the fundamentals of science and engineering, ample exposure to a wide range of applications and an understanding of contemporary issues and the need for lifelong learning.

M.Tech. Programme in Machine Design (ME66)

The objective of this programme is to develop personnel trained in design of mechanical systems and related areas for serving the industry as design engineers and analysts, or to motivate them for research in this challenging field. The thrust areas of this programme can be divided into two major categories: (i) stress analysis and related fields and (ii) vibration and dynamics. Students will be given a thorough training in both these areas before being
exposed to an advanced design course, where in they are expected to use their knowledge for system level design. After doing advanced core courses in subjects like solid mechanics, mechanisms and design, the students are expected to choose electives of their interest from an array of specialised courses like fracture mechanics, non-linear dynamics, etc., for developing the skills required for a successful career as a design engineer, analyst or researcher.

SCHOOL OF MATERIALS SCIENCE AND ENGINEERING

M.Tech. Programme in Nanotechnology (MT61)

Nanotechnology is an emerging interdisciplinary area, which is rated as one of the top-ranked subjects in academics and research. This Programme will impart state-of-the art knowledge  in this new area, and has an objective of training the students to make them capable of addressing the challenges of this emerging technological field. The Programme is designed for students with a background in Mechanical/Production/ Chemical Engineering. This will
deal with topics related to the fundamentals and applications of the subject, with a focus on emerging areas in nanoscience and nanotechnology. The courses offered in the Programme include fundamental and applied subjects such as Physics of Materials, Thermodynamics of Nano Materials and Systems, Mechanics of Finite-size Elements, Microscale and Nanoscale Heat Transfer, Nanosized Structures, Experimental Techniques in Nanotechnology and Micro
Electro Mechanical Systems, and a variety of elective subjects ranging from Computational Nanotechnology to Composite Materials from which students can choose, according to their background and interest. Laboratory courses dealing with production and applications of nanoparticles, nanofluids and nanocomposites, as well as giving exposure to discrete computational analysis of nanoscale phenomena and systems will also be offered as part of
the curriculum. The specialization in Nanotechnology holds a very high potential for employment in R&D, academics and industries, as well as provides a gateway to this extremely challenging field, which is expected to have a profound impact on the future of all streams of science and technology.

HOW TO APPLY?

1. Apply online using the following link http://www.dss.nitc.ac.in/MtechApp/login.aspx

2.  In order to start filling-in the online application form, register with your e-mail id and mobile number for creating a login in the online portal.
3.  Before you login for filling the application form, pay the application fee online and get online fee payment receipt. Payment can be made using Net Banking/Credit Card/SBI Challan (by cash) through State Bank Collect (online) at the following link by choosing the payment  category as MTECH (SPONSD.) APPLICATION FEE MONSOON 2020-21. https://www.onlinesbi.com/sbicollect/icollecthome.htm?corpID=365553 After successful completion of the fee payment, save the fee payment receipt for uploading in the application form. Application fee is as follows (Rs. 600/- for Open/OBC/EWS candidates, Rs. 300/- for SC/ST/PWD candidates). APPLICATION
FEE IS NON-REFUNDABLE.
4.  On submitting the online application, you will be directed to upload a recent PHOTOGRAPH (Maximum of 120 kB) of the candidate.
5.  Once the application is completed take a print of the application form in the pdf form. To get the application to be printed, you require an Adobe Acrobat Reader 6 or higher.

6.  The downloaded application form together with the scanned copy of the following documents (whichever is applicable) arranged in the order given below should be sent through e-mail to pgadmissions@nitc.ac.in with cc to vineeshravi@nitc.ac.in and subject as APPLICATION FOR M TECH / MPLAN SPONSORED on or before 19th May 2020

• Self attested copy of mark lists & degree certificate of the qualifying examination.
• Self attested copy of proof of date of birth (Aadhar/ 10th Class Certificate).
• Self attested copy of experience certificate.
• Sponsorship certificate duly filled by the sponsoring authority on their letter head with the seal of the sponsoring authority in the prescribed format.
• No objection certificate duly signed by the Head of the institution.
• Certificate of AICTE recognition in the prescribed format, for teachers sponsored by Engineering Colleges and Polytechnics.
• Online application fee receipt.

The list of selected candidates for test and/or interview will be available in the Institute website
in due course. No separate call letter for test and/or interview will be dispatched.

IMPORTANT DATES

Events Dates
Availability of Online Application in Institute website 23rd April to 19th May 2020
Last Date for Receipt of Completed Applications (By e-mail) 19th May 2020
Test and/or Interview To be announced later

LEGAL JURISDICTION

All disputes pertaining to the counseling and admission for the M. Tech./M.Plan. programmes of NIT Calicut shall fall within the jurisdiction of High Court of Kerala only.

DISCLAIMER

The statement made in the information brochure and all other information contained herein is believed to be correct at the time of publication. However, the Institute reserves the right to make, at any time without notice, changes in and additions to the regulations, conditions governing the admission, requirements, seats, fees and any other information, or statements contained in this information brochure. No responsibility will be accepted by the Institute/Chairperson-PG Admissions for hardship or expenses encountered by its students/any other person for such changes, additions, omissions or errors, no matter how they are caused.

Address for Correspondence:
Chairperson – PG Admissions
National Institute of Technology Calicut
NIT Campus P.O. Calicut 673 601
Kerala, India
Telephone: 0495 2286119
E-mail:pgadmissions@nitc.ac.in
Website: http://www.nitc.ac.in/index.php/?url=admission/index

For more details refer the Official Website :    http://www.nitc.ac.in/

Information Document

 Indus Towers Scholarship Program 2024-25 For Students with Disabilities

24
Jul
 

Indus Towers Scholarship Program 2024-25 For Students with Disabilities

Last date : 24.07.2024

 MPOWER Global Citizen Scholarship

31
Jul
 

MPOWER Global Citizen Scholarship

Last Date : 31.07.2024

 Kotak Junior Scholarship 2024-25

31
Jul
 

Kotak Junior Scholarship 2024-2025

Last Date : 31.07.2024

 Kotak Life Insurance Scholarship Program 2024-25

31
Jul
 

Kotak Life Insurance Scholarship Program 2024-25

Last Date : 31.07.2024

Your Response on NIT Calicut M.Tech & M.Plan (Sponsored) Admissions 2020

Leave a Reply

Your email address will not be published. Required fields are marked *

Join Our Social Media Pages

Get Timely alerts for Scholarships, Fellowships , Awards and Competitions, Internships  through SMS / Email / Whatsapp Join with US